High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is a challenging problem for owners. From the desired temperature to their favorite light level, guests will probably return for another stay when they can customize their room to suit their preferences. However, providing these features using old technology wastes a lot of energy. For example, there are plenty of issues with the old card key switches. Guests can put any card in the old switches, or they might ask for more than one card. Even if hotel desk refuses to give more than one card to a guest, she/he may claim to have lost the credit card.
The conventional old technology of hotel card switch. Additionally there is a large amount of over intake of lights and AC energy because of things running even though guests aren’t within their rooms, and this could cause a monetary loss for the owner. Needless to say, no hotel owner would like to prohibit guests from using a comfortable stay, nor do owners expect guests to enter a dark or cold accommodation. No one is to blame. Both guests and hotel owners have the right to fulfill their interests.
Some hotel owners think should they separate the AC from your main network, less energy will be consumed, while others feel that motion sensors would be the solution. However, these approaches neglect to resolve the issue. The AC is the most energy-consuming device of, and motion sensors could be nightmares given that they only function based on movement detection, which means that the AC and lights might go off while a guest is sleeping or reading a book. Nightmarish!
The TIS Automation Company offers the best solution for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with being able to detect human presence in a room. This ceiling-mounted sensor has several options, such as a PIR motion sensor, an easy harvest sensor, 2X digital inputs, infrared emitters suitable for all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.
TIS Energy servant, the newest way for hotel economical technology. By installing this door sensor in the entrance to some room, connecting it for the Energy Servant’s digital input, and programming the logic lines, the situation of room occupancy is entirely resolved.
The following logics may be defined with this sensor to manage room energy without the discomfort for guests:
Logic 1: If you have any movement inside the room, the occupancy mode will be on.
Logic 2: In the event the main door is closed and opened, a flag will activate for just one minute to see if there is certainly movement in room. If no movement is detected after one minute, the program will activate energy-saving mode. This can be beneficial in situations whenever a guest enters the area briefly. In energy-saving mode all lights are off aside from a nightlight, which stays on for 3 hours in case there exists another guest getting a nap. Also, the AC will never be turned off, however its temperature is going to be decreased by 2 degrees. This helps save energy with time.
Logic 3: If the energy-saving mode is enabled with no movement is detected for longer than 3-5 hours, the nightlight and AC will be turned off automatically. It is additionally possible to define lower temperature levels for that AC. Additionally, the Energy Servant can change the AC on/off if it recognizes that a balcony window/door is open. All of this requires is adding a magnetic contact connected to the balcony window/door and programming the preferred smart decision. The sunshine harvest sensor helps save energy by wscgid balcony lights off if there is enough sun light.
Another practical and beneficial capability of this sensor is its built in thermostat, that helps maintain the right temperature at all times. This will be significant to keep furniture fresh and intact. Also, in hot spots and even when the room is empty for a long period, humidity and bad smells will not turn into a problem in the room. This sensor could be programmed to alter AC to dry mode if the room temperature reaches or exceeds 28-30C degree. This could happen several times in the daytime if necessary. A similar performance can be programmed in cold spots to prevent mold.
An alternative choice of this smart device is TV control. If the hotel provides the guest with a room tablet, she/he is able to control the room’s TV by using it. This sensor was placed in 20 rooms in the Fairmount Blue Mountain Hotel in Sydney. The result was considerably enhanced energy management and lots of satisfactory comments from guests who enjoyed their luxurious remain at this hotel.
TIS offers the opportunity to meet both hotel owners and guests interests and requires with just a couple items and then in the most energy-efficient way possible. For more information or to schedule a consultation, contact us at www.tiscontrol.com